root@petalinux:/run/media/mmcblk0p1# ./vadd.exe binary_container_1.xclbin
XRT build version: 2.3.0
Build hash: 1eb61547b241c1a5a7aaee4645d6d481fb0f25d6
Build date: 2020-04-30 10:03:10
Git branch: 2019.2
PID: 2631
UID: 0
[Fri Aug 14 06:09:23 2020]
HOST: petalinux
EXE: /run/media/mmcblk0p1/vadd.exe
[XRT] ERROR: XILINX_XRT must be set
Error: Unable to find Target Device [XRT] ERROR: device is nullptr
468566588 bytes read in 30286 ms (14.8 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'kernel@1' kernel subimage
Description: Linux kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x10000104
Data Size: 18782720 Bytes = 17.9 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00080000
Entry Point: 0x00080000
Hash algo: sha1
Hash value: 05853503d3cc7626d21a571e2c02660d23cdfc21
Verifying Hash Integrity ... sha1+ OK
## Loading ramdisk from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'ramdisk@1' ramdisk subimage
Description: petalinux-user-image
Type: RAMDisk Image
Compression: gzip compressed
Data Start: 0x111f361c
Data Size: 449742479 Bytes = 428.9 MiB
Architecture: AArch64
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Hash algo: sha1
Hash value: 180260695745c9d753865b6accaa9c82a578e991
Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'fdt@system-top.dtb' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x111e9c08
Data Size: 39246 Bytes = 38.3 KiB
Architecture: AArch64
Hash algo: sha1
Hash value: 3ec245d229069abeb17ef8bd698ed8e9e4be5e4c
Verifying Hash Integrity ... sha1+ OK
Booting using the fdt blob at 0x111e9c08
Loading Kernel Image ... OK
Loading Ramdisk to 5e317000, end 78fff68f ... OK
Loading Device Tree to 0000000007ff3000, end 0000000007fff94d ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.0-xilinx-v2019.2 (oe-user@oe-host) (gcc version 8.2.0 (GCC)) #1 SMP Thu Apr 30 10:02:08 UTC 2020
[ 0.000000] Machine model: xlnx,zynqmp
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[ 0.000000] bootconsole [cdns0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x000000004e000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53656 r8192 d32360 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1033987
[ 0.000000] Kernel command line: earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/ram rw
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x7beff000-0x7feff000] (64MB)
[ 0.000000] Memory: 3342944K/4193280K available (11004K kernel code, 806K rwdata, 5652K rodata, 832K init, 314K bss, 588192K reserved, 262144K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq-xilinx: /amba_pl@0/interrupt-controller@80000000: num_irq=8, edge=0xff
[ 0.000000] arch_timer: cp15 timer(s) running at 30.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xdd67c8a60, max_idle_ns: 881590406601 ns
[ 0.000003] sched_clock: 56 bits at 30MHz, resolution 33ns, wraps every 4398046511088ns
[ 0.008211] Console: colour dummy device 80x25
[ 0.012391] Calibrating delay loop (skipped), value calculated using timer frequency.. 60.00 BogoMIPS (lpj=120000)
[ 0.022668] pid_max: default: 32768 minimum: 301
[ 0.027358] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033924] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.041682] ASID allocator initialised with 32768 entries
[ 0.046417] rcu: Hierarchical SRCU implementation.
[ 0.052721] EFI services will not be available.
[ 0.055742] smp: Bringing up secondary CPUs ...
[ 0.060405] Detected VIPT I-cache on CPU1
[ 0.060438] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.060740] Detected VIPT I-cache on CPU2
[ 0.060759] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.061048] Detected VIPT I-cache on CPU3
[ 0.061067] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.061110] smp: Brought up 1 node, 4 CPUs
[ 0.095585] SMP: Total of 4 processors activated.
[ 0.100258] CPU features: detected: 32-bit EL0 Support
[ 0.106995] CPU: All CPU(s) started at EL2
[ 0.109436] alternatives: patching kernel code
[ 0.114742] devtmpfs: initialized
[ 0.121221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.126824] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.138410] xor: measuring software checksum speed
[ 0.177021] 8regs : 2375.000 MB/sec
[ 0.217051] 8regs_prefetch: 2052.000 MB/sec
[ 0.257081] 32regs : 2725.000 MB/sec
[ 0.297108] 32regs_prefetch: 2309.000 MB/sec
[ 0.297149] xor: using function: 32regs (2725.000 MB/sec)
[ 0.301454] pinctrl core: initialized pinctrl subsystem
[ 0.307228] NET: Registered protocol family 16
[ 0.311341] audit: initializing netlink subsys (disabled)
[ 0.316489] audit: type=2000 audit(0.264:1): state=initialized audit_enabled=0 res=1
[ 0.324133] cpuidle: using governor menu
[ 0.328141] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.335359] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.342785] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.362224] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.430780] raid6: int64x1 gen() 445 MB/s
[ 0.498848] raid6: int64x1 xor() 453 MB/s
[ 0.566908] raid6: int64x2 gen() 680 MB/s
[ 0.634917] raid6: int64x2 xor() 599 MB/s
[ 0.702949] raid6: int64x4 gen() 981 MB/s
[ 0.770993] raid6: int64x4 xor() 736 MB/s
[ 0.839032] raid6: int64x8 gen() 1163 MB/s
[ 0.907065] raid6: int64x8 xor() 759 MB/s
[ 0.975182] raid6: neonx1 gen() 736 MB/s
[ 1.043177] raid6: neonx1 xor() 879 MB/s
[ 1.111225] raid6: neonx2 gen() 1128 MB/s
[ 1.179261] raid6: neonx2 xor() 1171 MB/s
[ 1.247292] raid6: neonx4 gen() 1476 MB/s
[ 1.315336] raid6: neonx4 xor() 1416 MB/s
[ 1.383406] raid6: neonx8 gen() 1530 MB/s
[ 1.451433] raid6: neonx8 xor() 1459 MB/s
[ 1.451471] raid6: using algorithm neonx8 gen() 1530 MB/s
[ 1.455426] raid6: .... xor() 1459 MB/s, rmw enabled
[ 1.460356] raid6: using neon recovery algorithm
[ 1.465863] SCSI subsystem initialized
[ 1.468840] usbcore: registered new interface driver usbfs
[ 1.474146] usbcore: registered new interface driver hub
[ 1.479415] usbcore: registered new device driver usb
[ 1.484468] media: Linux media interface: v0.10
[ 1.488923] videodev: Linux video capture interface: v2.00
[ 1.494374] pps_core: LinuxPPS API ver. 1 registered
[ 1.499282] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.508375] PTP clock support registered
[ 1.512274] EDAC MC: Ver: 3.0.0
[ 1.515749] zynqmp-ipi-mbox mailbox@ff990400: Probed ZynqMP IPI Mailbox driver.
[ 1.522895] FPGA manager framework
[ 1.526182] Advanced Linux Sound Architecture Driver Initialized.
[ 1.532341] Bluetooth: Core ver 2.22
[ 1.535628] NET: Registered protocol family 31
[ 1.540024] Bluetooth: HCI device and connection manager initialized
[ 1.546341] Bluetooth: HCI socket layer initialized
[ 1.551183] Bluetooth: L2CAP socket layer initialized
[ 1.556211] Bluetooth: SCO socket layer initialized
[ 1.561386] clocksource: Switched to clocksource arch_sys_counter
[ 1.567180] VFS: Disk quotas dquot_6.6.0
[ 1.571032] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.582211] NET: Registered protocol family 2
[ 1.582595] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 1.589979] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.597314] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.604062] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.610238] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.616215] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.622689] NET: Registered protocol family 1
[ 1.627086] RPC: Registered named UNIX socket transport module.
[ 1.632756] RPC: Registered udp transport module.
[ 1.637423] RPC: Registered tcp transport module.
[ 1.642094] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.648812] Trying to unpack rootfs image as initramfs...
[ 22.249357] Freeing initrd memory: 439200K
[ 22.249932] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 22.255106] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 22.263523] Initialise system trusted keyrings
[ 22.267107] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 22.274131] NFS: Registering the id_resolver key type
[ 22.278452] Key type id_resolver registered
[ 22.282595] Key type id_legacy registered
[ 22.286578] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 22.293246] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 23.386784] NET: Registered protocol family 38
[ 23.446133] Key type asymmetric registered
[ 23.446171] Asymmetric key parser 'x509' registered
[ 23.449482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 23.456791] io scheduler noop registered
[ 23.460681] io scheduler deadline registered
[ 23.464956] io scheduler cfq registered (default)
[ 23.469592] io scheduler mq-deadline registered
[ 23.474088] io scheduler kyber registered
[ 23.479659] xilinx-frmbuf b0020000.v_frmbuf_wr: Probe deferred due to GPIO reset defer
[ 23.512203] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 23.516028] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 23.523471] brd: module loaded
[ 23.527376] loop: module loaded
[ 23.528147] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 23.532916] libphy: Fixed MDIO Bus: probed
[ 23.536838] tun: Universal TUN/TAP device driver, 1.6
[ 23.540711] CAN device driver interface
[ 23.545340] usbcore: registered new interface driver asix
[ 23.549813] usbcore: registered new interface driver ax88179_178a
[ 23.555847] usbcore: registered new interface driver cdc_ether
[ 23.561641] usbcore: registered new interface driver net1080
[ 23.567266] usbcore: registered new interface driver cdc_subset
[ 23.573146] usbcore: registered new interface driver zaurus
[ 23.578690] usbcore: registered new interface driver cdc_ncm
[ 23.584807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.590782] ehci-pci: EHCI PCI platform driver
[ 23.595435] usbcore: registered new interface driver uas
[ 23.600492] usbcore: registered new interface driver usb-storage
[ 23.606937] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
[ 23.613663] i2c /dev entries driver
[ 23.617409] xilinx-video amba_pl@0:vcap_sdirx: /amba_pl@0/vcap_sdirx/ports/port@0 initialization failed
[ 23.626409] xilinx-video amba_pl@0:vcap_sdirx: DMA initialization failed
[ 23.633525] xilinx-csi2rxss b0000000.mipi_csi2_rx_subsystem: Xilinx CSI2 Rx Subsystem device found!
[ 23.643186] usbcore: registered new interface driver uvcvideo
[ 23.647773] USB Video Class driver (1.1.1)
[ 23.652250] Bluetooth: HCI UART driver ver 2.3
[ 23.656255] Bluetooth: HCI UART protocol H4 registered
[ 23.661353] Bluetooth: HCI UART protocol BCSP registered
[ 23.666650] Bluetooth: HCI UART protocol LL registered
[ 23.671733] Bluetooth: HCI UART protocol ATH3K registered
[ 23.677115] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 23.683362] Bluetooth: HCI UART protocol Intel registered
[ 23.688704] Bluetooth: HCI UART protocol QCA registered
[ 23.693907] usbcore: registered new interface driver bcm203x
[ 23.699530] usbcore: registered new interface driver bpa10x
[ 23.705065] usbcore: registered new interface driver bfusb
[ 23.710511] usbcore: registered new interface driver btusb
[ 23.715935] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 23.721601] usbcore: registered new interface driver ath3k
[ 23.727129] EDAC MC: ECC not enabled
[ 23.730786] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 23.743345] sdhci: Secure Digital Host Controller Interface driver
[ 23.748805] sdhci: Copyright(c) Pierre Ossman
[ 23.753128] sdhci-pltfm: SDHCI platform and OF driver helper
[ 23.759042] ledtrig-cpu: registered to indicate activity on CPUs
[ 23.764768] zynqmp_firmware_probe Platform Management API v1.1
[ 23.770519] zynqmp_firmware_probe Trustzone version v1.0
[ 23.799485] zynqmp_clk_mux_get_parent() getparent failed for clock: lpd_wdt, ret = -22
[ 23.802179] alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
[ 23.807416] zynqmp_aes zynqmp_aes: AES Successfully Registered
[ 23.807416]
[ 23.814824] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
[ 23.820952] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
[ 23.826604] usbcore: registered new interface driver usbhid
[ 23.831859] usbhid: USB HID core driver
[ 23.837962] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[ 23.842429] usbcore: registered new interface driver snd-usb-audio
[ 23.849062] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 23.856109] Initializing XFRM netlink socket
[ 23.860036] NET: Registered protocol family 10
[ 23.864734] Segment Routing with IPv6
[ 23.868103] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 23.874222] NET: Registered protocol family 17
[ 23.878316] NET: Registered protocol family 15
[ 23.882729] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 23.895647] can: controller area network core (rev 20170425 abi 9)
[ 23.901782] NET: Registered protocol family 29
[ 23.906161] can: raw protocol (rev 20170425)
[ 23.910397] can: broadcast manager protocol (rev 20170425 t)
[ 23.916022] can: netlink gateway (rev 20170425) max_hops=1
[ 23.921700] Bluetooth: RFCOMM TTY layer initialized
[ 23.926320] Bluetooth: RFCOMM socket layer initialized
[ 23.931441] Bluetooth: RFCOMM ver 1.11
[ 23.935140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.940412] Bluetooth: BNEP filters: protocol multicast
[ 23.945604] Bluetooth: BNEP socket layer initialized
[ 23.950532] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 23.956416] Bluetooth: HIDP socket layer initialized
[ 23.961468] 9pnet: Installing 9P2000 support
[ 23.965596] Key type dns_resolver registered
[ 23.970242] registered taskstats version 1
[ 23.973893] Loading compiled-in X.509 certificates
[ 23.978974] Btrfs loaded, crc32c=crc32c-generic
[ 23.989554] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 47, base_baud = 6250000) is a xuartps
[ 23.999428] console [ttyPS0] enabled
[ 23.999428] console [ttyPS0] enabled
[ 24.003173] bootconsole [cdns0] disabled
[ 24.003173] bootconsole [cdns0] disabled
[ 24.011206] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 48, base_baud = 6250000) is a xuartps
[ 24.023980] of-fpga-region fpga-full: FPGA Region probed
[ 24.029877] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 24.034529] nwl-pcie fd0e0000.pcie: host bridge /amba/pcie@fd0e0000 ranges:
[ 24.041507] nwl-pcie fd0e0000.pcie: MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 24.048734] nwl-pcie fd0e0000.pcie: MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 24.056328] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 24.062516] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 24.068007] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 24.074885] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
[ 24.085253] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 24.091069] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 24.097644] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 24.104747] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 24.111850] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 24.118944] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 24.126056] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 24.133157] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 24.140259] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 24.147353] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 24.154527] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 24.161625] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 24.168727] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 24.175828] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 24.182930] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 24.190029] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 24.197131] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 24.204229] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 24.211320] xilinx-frmbuf b0020000.v_frmbuf_wr: Xilinx AXI frmbuf DMA_DEV_TO_MEM
[ 24.218761] xilinx-frmbuf b0020000.v_frmbuf_wr: Xilinx AXI FrameBuffer Engine Driver Probed!!
[ 24.227637] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:8 protocol:4 pll_locked:yes
[ 24.238335] zynqmp_clk_divider_set_rate() set divider failed for spi0_ref_div1, ret = -13
[ 24.246949] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
[ 24.257650] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
[ 24.265685] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
[ 24.274374] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
[ 24.286812] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
[ 24.299487] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xilinx DisplayPort Sound Card probed
[ 24.309678] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000
[ 24.316691] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.323300] [drm] No driver support for vblank timestamp query.
[ 24.329276] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff8008bfe870)
[ 25.413401] [drm] Cannot find any crtc or sizes
[ 25.418156] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor 0
[ 25.426261] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsystem driver probed
[ 25.436431] m25p80 spi0.0: unrecognized JEDEC id bytes: 8c, 20, 08
[ 25.442941] macb ff0b0000.ethernet: Not enabling partial store and forward
[ 25.450347] libphy: MACB_mii_bus: probed
[ 25.459213] TI DP83867 ff0b0000.ethernet-ffffffff:0f: attached PHY driver [TI DP83867] (mii_bus:phy_addr=ff0b0000.ethernet-ffffffff:0f, irq=62)
[ 25.472085] macb ff0b0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0b0000 irq 30 (00:0a:35:00:22:01)
[ 25.482283] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[ 25.488835] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
[ 25.495327] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
[ 25.501800] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
[ 25.508705] dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
[ 25.514555] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:0 protocol:3 pll_locked:yes
[ 25.524715] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 25.530207] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 25.538151] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000202010810
[ 25.547565] xhci-hcd xhci-hcd.0.auto: irq 63, io mem 0xfe200000
[ 25.553698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 25.561960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 25.569177] usb usb1: Product: xHCI Host Controller
[ 25.574045] usb usb1: Manufacturer: Linux 4.19.0-xilinx-v2019.2 xhci-hcd
[ 25.580737] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 25.585901] hub 1-0:1.0: USB hub found
[ 25.589667] hub 1-0:1.0: 1 port detected
[ 25.593778] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 25.599270] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 25.606926] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 25.613650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 25.621911] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 25.629130] usb usb2: Product: xHCI Host Controller
[ 25.633998] usb usb2: Manufacturer: Linux 4.19.0-xilinx-v2019.2 xhci-hcd
[ 25.640690] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 25.645805] hub 2-0:1.0: USB hub found
[ 25.649568] hub 2-0:1.0: 1 port detected
[ 25.653988] dwc3-of-simple ff9e0000.usb1: dwc3_simple_set_phydata: Can't find usb3-phy
[ 25.662331] dwc3 fe300000.dwc3: Failed to get clk 'ref': -2
[ 25.668113] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 25.673599] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 25.681546] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000202010010
[ 25.690959] xhci-hcd xhci-hcd.1.auto: irq 66, io mem 0xfe300000
[ 25.697068] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 25.705329] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 25.712545] usb usb3: Product: xHCI Host Controller
[ 25.717417] usb usb3: Manufacturer: Linux 4.19.0-xilinx-v2019.2 xhci-hcd
[ 25.724114] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 25.729240] hub 3-0:1.0: USB hub found
[ 25.733008] hub 3-0:1.0: 1 port detected
[ 25.737111] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 25.742602] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 25.750257] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 25.756905] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 25.765075] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 25.773333] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 25.780545] usb usb4: Product: xHCI Host Controller
[ 25.785413] usb usb4: Manufacturer: Linux 4.19.0-xilinx-v2019.2 xhci-hcd
[ 25.792104] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 25.797227] hub 4-0:1.0: USB hub found
[ 25.800992] hub 4-0:1.0: 1 port detected
[ 25.806162] ov5640 3-003c: 3-003c supply DOVDD not found, using dummy regulator
[ 25.813503] ov5640 3-003c: Linked as a consumer to regulator.0
[ 25.819330] ov5640 3-003c: 3-003c supply DVDD not found, using dummy regulator
[ 25.826568] ov5640 3-003c: 3-003c supply AVDD not found, using dummy regulator
[ 25.834009] ov5640 3-003c: ov5640_read_reg: error: reg=300a
[ 25.839581] ov5640 3-003c: ov5640_check_chip_id: failed to read chip identifier
[ 25.846970] i2c i2c-0: Added multiplexed i2c bus 3
[ 25.851892] i2c i2c-0: Added multiplexed i2c bus 4
[ 25.856810] i2c i2c-0: Added multiplexed i2c bus 5
[ 25.861953] i2c i2c-0: Added multiplexed i2c bus 6
[ 25.894750] i2c i2c-0: Added multiplexed i2c bus 7
[ 25.925418] i2c i2c-0: Added multiplexed i2c bus 8
[ 25.930334] i2c i2c-0: Added multiplexed i2c bus 9
[ 25.935249] i2c i2c-0: Added multiplexed i2c bus 10
[ 25.940119] pca954x 0-0070: registered 8 multiplexed busses for I2C switch pca9548
[ 25.947703] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
[ 25.954113] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
[ 25.960319] xilinx-video amba_pl@0:vcap_sdirx: Entity type for entity b0000000.mipi_csi2_rx_subsystem was not initialized!
[ 25.971362] xilinx-video amba_pl@0:vcap_sdirx: device registered
[ 25.977622] xilinx-video amba_pl@0:vcap_sdirx: Entity type for entity b0010000.v_proc_ss was not initialized!
[ 25.987529] xilinx-vpss-csc b0010000.v_proc_ss: VPSS CSC 8-bit Color Depth Probe Successful
[ 25.996166] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1200000 KHz
[ 26.003571] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1200000000 (-34)
[ 26.012316] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1199999 KHz
[ 26.020850] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1200000000 (-34)
[ 26.061011] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
[ 26.076687] rtc_zynqmp ffa60000.rtc: setting system clock to 2020-08-14 18:06:33 UTC (1597428393)
[ 26.085555] of_cfs_init
[ 26.088009] of_cfs_init: OK
[ 26.090921] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 26.157889] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 26.186046] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 26.193198] mmcblk0: mmc0:aaaa SB32G 29.7 GiB
[ 26.201767] mmcblk0: p1
[ 26.235765] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 26.242295] clk: Not disabling unused clocks
[ 26.246563] 1v5: disabling
[ 26.249257] ALSA device list:
[ 26.252212] #0: DisplayPort monitor
[ 26.256184] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 26.264796] cfg80211: failed to load regulatory.db
[ 26.270610] Freeing unused kernel memory: 832K
[ 26.293414] Run /init as init process
INIT: version 2.88 booting
[ 26.337564] usb 3-1: New USB device found, idVendor=0424, idProduct=2513, bcdDevice= b.b3
[ 26.345749] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 26.397123] hub 3-1:1.0: USB hub found
[ 26.400955] hub 3-1:1.0: 3 ports detected
Starting udev
[ 26.426050] udevd[1831]: starting version 3.2.5
[ 26.430863] random: udevd: uninitialized urandom read (16 bytes read)
[ 26.437351] random: udevd: uninitialized urandom read (16 bytes read)
[ 26.443838] random: udevd: uninitialized urandom read (16 bytes read)
[ 26.470934] udevd[1832]: starting eudev-3.2.5
[ 26.534203] zocl: loading out-of-tree module taints kernel.
[ 26.537586] mali: loading out-of-tree module taints kernel.
[ 26.545987] [drm] Probing for xlnx,zocl
[ 26.549980] [drm] FPGA programming device pcap founded.
[ 26.555210] [drm] PR Isolation addr 0x0
[ 26.563937] [drm] Initialized zocl 2018.2.1 20180313 for amba:zyxclmm_drm on minor 1
[ 26.579947] [drm] Cannot find any crtc or sizes
Configuring packages on first boot....
(This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-libmali-xlnx...
[ 27.258675] update-alternatives: Linking /usr/lib/libMali.so.9.0 to /usr/lib/x11/libMali.so.9.0
[ 27.303415] update-alternatives: Linking /usr/lib/libMali.so.9.0 to /usr/lib/x11/libMali.so.9.0
[ 27.334522] Warn: update-alternatives: libmali-xlnx has multiple providers with the same priority, please check /usr/lib/opkg/alternatives/libmali-xlnx for details
[ 27.362947] update-alternatives: Linking /usr/lib/libMali.so.9.0 to /usr/lib/x11/libMali.so.9.0
[ 27.407266] update-alternatives: Linking /usr/lib/libMali.so.9.0 to /usr/lib/x11/libMali.so.9.0
Running postinst /etc/rpm-postinsts/101-xrt...
[ 27.482976] INFO: Creating ICD entry for Xilinx Platform
Running postinst /etc/rpm-postinsts/102-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
INIT: Entering runlevel: 5
Configuring network interfaces... [ 27.590558] pps pps0: new PPS source ptp0
[ 27.594586] macb ff0b0000.ethernet: gem-ptp-timer ptp clock registered.
[ 27.601287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc: started, v1.29.2
udhcpc: sending discover
[ 28.990699] macb ff0b0000.ethernet eth0: link up (1000/Full)
[ 28.996372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: sending discover
udhcpc: sending select for 192.168.3.36
udhcpc: lease of 192.168.3.36 obtained, lease time 86400
/etc/udhcpc.d/50default: Adding DNS 192.168.3.1
done.
Starting system message bus: dbus.
Starting haveged: haveged: listening socket at 3
haveged: haveged starting up
Starting Xserver
Starting Dropbear SSH server:
Generating 2048 bit rsa key, this may take a while...
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
Build Op[ 31.003429] [drm] Pid 2393 opened device
erating System: Linux 3.10.0-327.el7.x86_64 x86_64
Current Op[ 31.010927] [drm] Pid 2393 closed device
erating System: Linux petalinux 4.19.0-xilinx-v2019.2 #1 SMP Thu Apr 30 10:02:08 UTC 2020 aarch64
Kernel command line: earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/ram rw
Build Date: 24 October 2019 07:22:49AM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 14 18:06:37 2020
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system[ 31.075780] random: fast init done
config directory "/usr/share/X11/xorg.conf.d"
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCxlpWfR9AKmzC9bMfF6vKbHGYtaow58GGkJVI2L/CJPrxV2J1x+L1g/87UQBMUXZUVZ4zoHargdY05dAW2Sb2VDjXZjNg4sHhEvkzdNxJTIpyeWrQ1v/iRgPqfbwKUfAR6H9YBJtxuuTQnh4XzcJQFqXHuZcgyL1nwrm8dcO9XBu1xXkndQ5ezK/XXGXAlVp96KvIgDjf/Sri6LxSx25N3k0vq30lbP2PreVnOE0XwW2yMbWnMF2NAclD+DlMeT1wt0oXRY/5tMU5Eo75eG9EY7qle+snEw4KzGstJWm1JRhnocrvAa9d3VwROEt0PQ0L3rzIyCvf/6COGEOg8pu4J root@petalinux
Fingerprint: sha1!! 53:56:a8:63:48:2c:8a:66:a0:76:2e:18:70:50:82:eb:23:73:a8:e9
dropbear.
Starting bluetooth: bluetoothd.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ]
Starting Telephony daemon
Starting tcf-agent: [ 31.757879] random: crng init done
[ 31.761275] random: 7 urandom warning(s) missed due to ratelimiting
OK
PetaLinux 2019.2 petalinux /dev/ttyPS0
petalinux login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Unsupported high keycode 372 for name <I372> ignored
> X11 cannot support keycodes above 255.
> This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-LsHScu4eDy,guid=3d241d22dab4507b9c5f111d5f36d2af
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts
matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates
matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)[settings daemon] Forking. run with -n to prevent fork
(matchbox-panel:2477): dbind-WARNING **: 18:06:40.109: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)
(matchbox-desktop:2476): dbind-WARNING **: 18:06:40.110: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)
PetaLinux 2019.2 petalinux /dev/ttyPS0
petalinux login: root
Password:
root@petalinux:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
inet addr:192.168.3.36 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::20a:35ff:fe00:2201/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14 errors:0 dropped:12 overruns:0 frame:0
TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1704 (1.6 KiB) TX bytes:8013 (7.8 KiB)
Interrupt:30
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@petalinux:~#
| 日 | 月 | 火 | 水 | 木 | 金 | 土 |
|---|---|---|---|---|---|---|
| - | - | - | - | - | 1 | 2 |
| 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 31 | - | - | - | - | - | - |